• The HT-ESD™ have static protection and heat protection in clean room compatible glove. HT-ESD™ gloves use monofilament Nomex® woven fabric suffused with carbon fiber and enhance the heat protection with a 100% inner insulation tricot knit polyster fibric liner. Gloves resist up to 572°F (300ºC).
• The HT-ESD™ glove are designed for printed circuit board, semiconductor and other processes that require handling objects at elevated temperatures without compromising cleanliness of potential damage to static discharge. The full length 27cm gloves allow you to have static control and significant heat protection is one cleanroom compatible glove.
• Applications: Semiconductor, SMT assembly, disk drive, static and contamination control.

1) HT-ESD™ Model: G327 WF- 300ºC

2) HT-ESD™ Model: G427 WF- 400ºC

• The HT-ESD^TM2 have static protection and heat protection in clean room compatible glove, HT-ESD2 gloves use monofilament Nomex^® woven fabric suffused with carbon fiber and enhance the heat protection with a 100% inner insulating tricot polyster fibre liner. Glove resist up to 200^oC.
• The HT-ESD^TM2 glove are designed for printed circuit board, semiconductor and other processes that require handling objects at elevated temperatures without compromising cleanliness of potential damage to static discharge.
• The full length 45cm gloves allow you to have static control and significant heat protection is one cleanroom compatible glove.
• Applications: Semiconductor, SMT assembly, disk drive, static and contamination control.

1) HT-ESD^TM2 Model: G245WF - 200^oC

Specification for HYHEAT Blue Mittens 1000D

Duramitt’s HYHEAT Mittens are made from an outer over of Blue Vertex vermiculite coated fibreglass fabrics.  These fabrics can operate at service temperatures of 815ºC on a continuous basis and 1000ºC on a short term basis.  The insulation properties of the mittens are also enhanced by successive layers of wool linings.  These act as heat barriers, to provide the ultimate in thermal and abrasion resistance.
All of Duramitt’s HYHEAT Mittens features an oversize cut to enable quick entry and exit.  For the highest temperature application, it is recommended that mittens be used as there is less seam exposure and correspondingly, less heat transfer.  Cover mittens should be used in high heat situations to addition layers between the source of heat and the hand.
Duramitt’s HYHEAT Mittens come in 14 inch lengths. However, these reinforced mittens should not be used in wet environments when there is a possibility of overhead electrical cables causing a shock.

Possible Applications
Steel mill tapping operations, Aluminium, Zinc and other non-ferrous metal smelting.  The mittens may also be used to handle hot metal extrusions during the die moulding process.
Glass factories and plants – for handling hot glass plates, bottles and bowls etc.
Ceramic kilns & furnaces – for handling hot moulds, porcelain or ceramic wear.

ESD, Thermal, Cut Gloves

Product Features

• Seamless knitted nylon and conductive carbon with nylon yarn, heavyweight high performance polyethylene (HDPE) fibre provides static protection, heat protection and high cut resistance in clean room compatible glove.
• Gloves resist up to 300-325°F (149-162°C)
• High dexterity and reinforced protection where needed.
• Glove are designed for printed circuit board, semiconductor and other processes that required handling objects at elevated temperatures without compromising cleanliness of potential damage to static discharge.  This glove allow you to have static control and significant heat protection as well as cut protection.
• Machine washable for economy of repeated use.
• Applications: Semiconductor, SMT assembly, disk drive, circuit board handling, inspection, static and contamination control.
• Size: 7(M), 8(L), 9(XL), 10(XXL)
• Pack: 12 pairs/pack

ESD Characteristics

• Static dissipative: surface resistance 10^7 ohms uncoated area, -10^8-9 ohms coated area