• Acid gas cartridge
• Swept-back design for enhanced field of view and balance
• Use with 3M™ Reusable Respirators

NIOSH approved against certain acid gases. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

Use in a variety of applications including chemical manufacturing, glass etching, pulp and paper, and laboratories. When properly fitted, helps provide respiratory protection from chlorine, hydrogen chloride, sulfur dioxide, or chlorine dioxide, or hydrogen sulfide at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).

• NIOSH approved for protection against certain organic vapors or acid gases
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

The 3M™ Organic Vapor/Acid Gas Cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Organic Vapor/Acid Gas Cartridge 6003 helps provide organic vapor and acid gas protection in a variety of environments. When properly used with an approved 3M respirator properly fitted, this respirator cartridge helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge is commonly used in the following industries: agriculture, aluminum reduction, chemical manufacturing, laboratories, petrochemical, pharmaceuticals, pulp and paper, and utilities.

This organic vapor and acid gas cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and acid gases. This cartridge is not for use in environments that are immediately dangerous to life or health (IDLH). The cartridge has been assigned the color code “Yellow” in the NIOSH system.

Breathing organic vapors or acid gases can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor/Acid Gas Cartridge 6003 to help reduce exposure to certain organic vapors and acid gases.

• Ammonia and methylamine cartridge
• Swept-back design for enhanced field of view and balance
• Use with 3M™ Reusable Respirators
  
  

NIOSH approved against ammonia and methylamine. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).

• NIOSH approved for protection against certain organic vapors, acid gases, ammonia, methylamine and formaldehyde
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduces training requirements

NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Multi Gas & Vapor Cartridge 6006 helps provide gas and vapor protection in a variety of environments. The cartridge may be used for gas and vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly, batch-charging, chemical clean-up, chemical transfer, cleaning, hazardous waste handling, painting, pouring molten metal. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, mining, oil and gas, and primary metals.

This multi gas and vapor cartridge works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, chlorine, hydrogen chloride, chlorine dioxide, sulfur dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride. The cartridge has been assigned the color code “olive” in the NIOSH system.

Breathing gases and vapors can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor Cartridge 6006 to help reduce exposure to certain gases and vapors.

• This series combines comfort and convenience
• Comfortable soft, lightweight facepiece with easy-to-adjust head straps
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• Can be disassembled, cleaned and reused
• Replaceable cartridges and filters allow reuse of facepiece for cost savings
  
  

This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.

The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.

NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.

• Large lens provides a wide field of view for excellent visibility
• Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning
• Available in air-purifying and supplied air respirator modes
• Center adapter directs exhaled breath downward
• 3M Cool Flow Valve makes breathing easier to provide cool, dry comfor

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M™ particulate filters or cartridges to help provide respiratory protection against particulates and/or a variety of gases and vapors.

The 3M™ Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M™ Cool Flow ™ Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

The facepiece works with these approved 3M™ filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M™ Cartridges 6000 Series: 6001, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60922, 60923, 60924, 60925, 60926, 60928, and 60929.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

Surgical Disposable
* 3-ply Facemask
* Without Glass Fibres
* Hypoallergenic
* Very low resistance to breathing
* Nose bar adaptable
* High filtration capacity
* Perfect fitting
* Qty: 50 pcs

Carbon Disposable
* Without Glass Fibres
* Hypoallergenic
* Very low resistance to breathing
* Nose bar adaptable
* High filtration capacity
* Perfect fitting
* Qty: 50 pcs

• NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
• Two-strap design with welded dual point attachment helps provide a secure seal
• Cushioning nose foam
• Adjustable noseclip helps provide a custom fit and secure seal
• Lightweight construction promotes greater worker acceptance and may help increase wear time
• Advanced electrostatic media is designed for ease of breathing
  
  
• This classic disposable N95 particulate respirator is designed to help provide comfortable, reliable worker respiratory protection against certain non-oil based particles.

Packaging: 20pcs/box